Sanded instrument sub panel for priming. Installed latch mechanism spring to canopy frame.
Match drilled taxi position striker to anchor block. Fabricated and installed shims for canopy handle knob.
Final sanded aft edge of instrument sub panel.
Applied micro to sub panel fillets.
Installed canopy latch mechanism. Trimmed pushrods to final length and tweaked bends for smooth operation.
Primed pushrods and various small parts.
Painted inside of canopy frame.
Applied micro to fill pin holes and imperfections then applied final primer coat. Paint tomorrow!
Primed various latch mechanism parts. Rough sanded gap fairings micro.
Trimmed empennage gap fairings and applied micro.
Edge prepped canopy latch brackets.
Finished sanding canopy frame then primed.
Finished rough sanding empennage fairing.