Managed to squeeze in an hour and finished rib edge prep, deburr, and scuff.
Finished right flap edge prep and skin dimpling. Primed right flap skin, spar, and ribs. Drilled left flap brackets to rib spar. Began deburring left flap skins.
Edge prepped left aileron brackets.
Began deburr, edge prep, and scuff on right flap skin.
Riveted reinforcement plates to aileron spars.
Made flap reinforcement plate bends, quite tough with 1/8″ aluminum but they came out very nice. About a 6.5 degree bend.
Finished match drilling right flap skin and reinforcement plates to spar and rib.
Finished edge prep and dimpling. Primed all parts except counter balance bar and leading edge. I need a better primer for dissimilar metals. Trying to source some zinc chromate.
Finished drilling and countersinking left aileron counterbalance bar. Dimpled leading edge and began edge prep, deburr, and scuffing of parts.
Finished drilling and countersinking right aileron counterweight bar. Dimpled leading edge. Edge prepped, deburred, and scuffed all parts.
Dimples in leading edges turned out well.