Continued riveting top outboard skin.
Two days work 12/28-12/29/14.
Riveted inboard top skins and began riveting outboard skins.
Edge prepped right aileron hinge brackets and cut right and left aileron stiffeners from stock.
Spot primed rib sratches, finished remaining leading edge rivets, sealed right tank Z brake pop rivets, and clecoed top skins to ribs.
Riveted right leading edge to main spar. Vans okayed LP-4 rivets for the rib flange to spar. I only had to use these on the middle three ribs. The rest I was able to buck solid rivets.
Riveted landing light wire clamps to leadind egde ribs.
Was able to get all of the baffle to skin rivets set and sealed!
Just need to install the access plate with access door sealant.
After sealant is cured I will leak test and hopefully pass.
Used exactly one quart of flamemaster thus far.
Sealed right tank baffle to end rib rivets.