Wiring continued: 6.8 hours

Installed terminals to wire for baggage lights, left and right batter switches, and right buss main power. Finished transponder connector wiring. Installed left cockpit map light.


Pitot install: 7.2 hours

Drilled pitot mast holes to accept pitot tube, took a lot of time not and easy task. The pre drilled and tapped holes in the tube had to be transfered to the mast from the inside out requiring the fabrication of a template on a curved surface.
Cut and flared pitot lines and attached to flex lines.

Mounted heater control box to rib.