Riveted ground blocks to lower longerons.
Riveted F812 to aft bottom skin. Drilled and primed tail spring mount shims
Finished match drilling and riveted battery bus mounts to longerons.
Primed various parts, and final drilled for bolts tail spring to F811.
Went with the dual boost pump module since I decided against an engine driven pump. Walbro pumps rated to 400 HP each. Very nice quailty.
Torqued gearbox bolts, riveted F807 to outboard seat ribs. Back riveted mid longerons to aft skins and installed cover plate nutplates. Riveted static ports to aft side skins.
Riveted stab attach bar to F811.
Began match drilling battery buss brackets to longerons.
Finished riveting comm antenna doublers to skin.
Riveted baggage rib angles to baggage ribs.
Clecoed side skins to center section and riveted upper longerons to forward fuselage.
Riveted bulkheads and arm rest to left and right mid side skins.
Match drilled battery ground blocks to lower longerons.
Primed center section skins, bulkheads, and arm rest. Riveted outboard seat ribs to center bottom skins.