Finished edge prep, prime, and dimple of top right wing skins.
Finished left landing light lens install. Began right landing light install.
Primed and installed platenuts to lens retainers. Drilled and countersunk lens. Lens complete.
Finished priming bottom wing skins. Managed to break my reamer match drilling so I am dead in the water until I get a replacement. So for now I will be jumping around doing what I can.
Math drilled joint plate to right fuel tank skin and Z bracket to inboard tank rib flange.
Marked and cut out right landing light lens.
Scarfed, edge prep, and dimpled lower right wing skins. Dimpled bottom of ribs and aft spar. Primed bottom right wing skins.
Primed left bottom wing skins. Match drilled right joint plate to leading edge rib. Installed Z brackets and clecoed right tank to spar. Deburred right wing bottom skins.