Aileron prep and flap construction: 7.7 hours

Found a product by Eastwood-two part epoxy primer in a spray can. Just enough to do the job. Expensive but cheaper than gun paint. Primed both aileron balance bars and leading edges. Used a rag soaked with primer run through the inside of pipe to get a good coat internally.

image

Dimpled and primed left flap ribs and spar.
Riveted ribs to right flap skin.
Finished dimpling right aileron skin and spar, ready to rivet.

image

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s